Learn how to create this peek-a-boo red nail with silver stripes, black boxes and yep, you guessed it, a slight shade of red hidden in-between.
CND SUPPLIES: Shellac Base Coat; Shellac Colors: Cream Puff and Fedora; Additives: Bright Red Pigment; Shellac Top Coat and CND UV Lamp.
ART SUPPLIES: 99 percent Isopropyl Alcohol, Striping Tape, Detail Brush
TRY IT:
Step 1: Prep the natural nail.
Step 2: Apply a thin layer of Shallac Base Coat and cure for 10 seconds in the CND UV Lamp.
Step 3: Apply a thin layer of Shellac Cream Puff and cure for two minutes.
Step 4: Use striping tape to block off the design by placing three vertical stripes equally spaced down the nail. Then apply stripes from the left side to the center on a slight diagonal, and repeat from the right side to the center. The left and right should meet in a point at the center.
Step 5: Apply a thin layer of Shellac Fedora over the entire nail leaving one square empty. cure for two minutes.
Step 6: Dip the tip of a Gel oval brush into Bright Red Pigment and brush on to the white square. Remove striping tape. Use a detail brush moistened with 99% Isopropyl Alcohol to clean up stripes if needed.
Step 7: Apply a thin layer of Shellac Top Coat and cure for two minutes.
Step 8: Wipe with 99% Isopropyl Alcohol to remove top film.
For more information about the products listed above, visit www.cnd.com.
